你好。
Hello.

在本教程中，我们将学习维护按钮的用法。
In this tutorial, we will learn maintain button usage.

首先，我们使用右侧的瞬时按钮和同一个按钮。
Firstly, we worked with the momentary button, right, and the same button.

我要改变这一点。
I am going to change that.

只是一个动作，好吗？
Just an action, OK?

现在您很快就会看到我们已经设置、重置和替代选项。
And now you will see after momentarily we have set and reset and alternate options.

替代方法是改变按钮的状态。
Alternate is the changing the condition of the button.

那么如果按下它就会打开会发生什么？
So what's happening if pressing it will be on?

如果我再按一下，它就会关闭。
If I am pressing again, it will be off.

好的？
OK?

我现在将使用备用。
And I will use now alternate.

这是第一件事，现在我将这个按钮复制到这里。
This is the first thing, and now I will copy this button to here.

好的。
OK.

让我们进入这个按钮，这将是重置按钮。
And let's go inside to this button and this is going to be reset button.

它将重置 M10。
It's going to reset M10.

好的。
OK.

另外，我将复制此内容，让我们看一下此处的整个位操作，我会说只需设置 M10。
And also, I will copy this and let's take a look once the whole bit actions here and I will say just set M10.

好的，只是我们需要转到这里，我们需要转到文本区域，我们可以说这将被重置。
OK, just we need to go to here and we need to go to the text area and we can say this is going to be reset.

这将会是。
And this is going to be.

重置它。
Reset it.

好的。
OK.

这将会是。
And this is going to be.

好的。
OK.

只是一套。
Just the set.

我们可以再次说，好的，现在我们可以先进入模拟器，然后会发生什么？
And we can say to on condition again that, OK, now we can go to simulator firstly and then what will happen?

我们所做的，我们使用了替代条件。
What we did, we used an alternate condition on the.

我们利用势头进行工作，但现在这是使用此按钮的替代操作。
We work with the momentum, but now this is an alternate action using this button.

这是一个重置和重置按钮，对吗？
This is a reset and reset button, right?

让我们去找先生吧。
And let's go to Mr.

Bishop DLC编程区然后让我们去模拟器看看交替。
Bishop DLC programming area and then let's go to the simulator and let's look to alternate.

我只是点击一些。
I'm just clicking ones.

让我们来看看。
Let's take a look.

好吧，现在发生了什么？
OK, now what happened?

这是停用的，所以现在它被保留，并且这个按钮是交替的，这种接触情况，如果我再按一次，好的，你会看到现在又被激活了。
This is inactivated, so it is now maintained and also this button is alternated, this contact situation, if I press again, OK, you will see this is now this activated once more.

这是主动和维护的。
This is active and maintain.

而现在这个数字为零。
And now this is zero.

如果我说你会说这个就是说那个，好吧，你会看到的。
If I said you will say this is to say that, OK, you will see it.

现在10已激活。
And 10 is now activated.

如果我按下重置，它会被重置，我们可以在再次按下时使用它，或者我们可以坐在一个按钮上，然后我们可以重置另一个按钮。
If I press reset, it is reset that we can use on press again off, or we can sit with one button and we can reset another button.

这样就OK了。
This is up to OK.

这些都在运行，并且如果我按下则表示它已经设置并重置。
And these are all running and on if I am pressing said it is already set and reset.

这就是您如何使用按钮操作和替代条件、瞬时条件设置和重置条件。
This is how can you work with the button actions and alternate condition, momentary conditions set and reset conditions.

您将把所有这些应用到您的 HMO 项目中，因为这些都非常重要。
And you are going to use all this into your HMO projects because of that, these are all really important.

如果您遇到任何困难，可以立即向我提问。
If you're stuck at any point, you can ask me a question immediately.

另外，再见，还有一个额外的托里奥。
Also, see you into an extra torrio.